I. Intelligent Control Automation Systems

ID 03. Laggoun A., Mouss K.N., Driss I., Hybrid genetic algorithm for a problem lot: Sizing with transport.

ID 07. Sereir B.B., Tahour A., Fuzzy sliding mode control of a dual star induction machine with an MRAS observer.

ID 100. Behih Khalissa, Benmahammed Khier, Zehar Djamila, Cherif Aida, Fuzzy adaptive sliding mode control for piezoelectric actuators system.

ID 108. Asri A., Mihoub Y., Hassaine S., Fuzzy sliding mode based-MPPT control of PMSG wind turbine.

ID 111. Kahia B., Bouafia A., Chaouia A., Abdelrahem M., Krama A., Kennel R., An improved look-up table-direct power control strategy for three level NPC rectifier.

ID 123. Nadour M., Cherroun L. and Boumehraz M., Using optical flow and VRML to visual navigation of a mobile robot.

ID 124. Dif I., Benmahammed K., Kouzou A., Hafaifa A., Bond graph synthesis backstepping control of mass-damping system.

ID 127. Bouhedda M., Oudjouadj A., Aggoun A., Rebouh S., Intelligent traffic light controller based on multi agent system: Design and hardware implementation.

ID 128. Bouhedda M., Benyezza H., Toumi Y., Rebouh S., Smart fuzzy traffic control system based on PLC.

ID 13. Iddir H., Demim F., Nemra A., Aidene M., Louadj K., Optimization of the erasing electricity consumption in a building.

ID 132. Nour M., Tedjini H., Gasbaoui B., Direct torque control of induction machine drive based on fuzzy logic systems.

ID 137. Bagua H. Hafaifa A., Guemana M., T-S Fuzzy modeling of an industrial gas turbine using fuzzy C-Means algorithm based on experimental data.

ID 139. Nikola Shakev, Andon V. Topalov, Sevil A. Ahmed, Vasil L. Popov, Stable trajectory tracking controller for multi robot formation.

ID 146. Elmir Y., Chouraqui S., Application of artificial intelligence techniques in control engineering : Comparative study; PID and fuzzy controller.

ID 147. Elmir Y., Chouraqui S., Adjusting PID controller parameters using multi-objective evolutionary approach

ID 19. Sediri M., Hanini S., Abbas Turki S., Laidi M., Artificial neural network modelling of dynamic adsorption of phenol onto active carbon.

ID 39. Khemar A., Kacha A., Takhedmit H., Abib G., Design and experiment of a printed monopole antenna array for ambient RF energy harvesting.

ID 44. Achouri D., Batel N., A comparative study between a DPLL and a DSP based SPLL.

ID 48. Aounallah N., Analysis study of radar waveforms and ambiguity function.

ID 49. Mahammedi A.,  Kouzou A., Hafaifa A.,  Fuzzy logic controller based maximum power point tracking of PV system.

ID 52. Kahouadji M., Mechernene A., Benyelles S., Dehak S., Bensalah C., Choukchou Braham A., Cherki B., Experimental control of rotary inverted pendulum with dSPACE DS1104.

ID 66. Allad M., Charif M., Haddouche R., PI controller implementation for the pressure control based on LabView platform.

ID 73. Dlal O., Zidani F., The comparative THD analysis of three level rectifier based on direct power control technique.

ID 74. Bendib R., Sayah K., Mehmoudi L., Zennir Y., Design of an optimal PID controller for a PH neutralization process using genetic algorithms.

ID 75. Charif M.,  Haddouche R., Bensidhoum M.T., Simplest fuzzy controllers implemented in an industrial micro-PLC.

ID 76. Zehar D., Benmahammed K., Behih K., Cherif A., Stabilization of an underactuated system using synergetic control.

ID 79. Belhachem R., Benhamida F., Ziane I., Salhi Y., Dahmane M.A, A unit commitment solution using dynamic programming method.

ID 86. Oubelaid A., Berkani Y., Taib N., Rekioua T., Speed control and performance analysis of PMSM using particle swarm optimization.

ID 93. Saadi S., Ghibeche Y., Hafaifa A., Optimal design of IIR filters using Least Lp norm: Application to ECG signal filtering.

ID 94. Guibeche Y., Saadi S., Benhouas A., Design and FPGA implementation of a viterbi decoder for an OFDM transmission system.

ID 95. Benmansour J.E., Si Mohammed A.M., Khouane B., Composite disturbance observer based controller for pitch attitude stabilization.

ID 96. Ben Hassena A., Ksantini M., Delmotte F., Mono and multi object classification: Applied to fish type classification and the aerial targets classification.

 II. Modelling and Identification Systems

ID 05. Houari H., Souier M., Sari Z., Comparison of genetic algorithms variants for the improvement of the performances of flexible manufacturing systems.

ID 113. Hachi D., Lefkaier I. K., Helifa B., Zitouni M., Modeling of eddy currents problems by three dimensional finite elements method: Using A -V formulation.

ID 121. Benlahbib A., Boudraa A., Mekhanet M., Yacine A., Study and application of multiband PSSs for a multimachine system.

ID 122. Bot Y., Allali A., Denai M., Auto-adaptive control of distribution network voltage unbalance under high penetration of single-phase photovoltaic.

ID 134. Taibi H., Messelmi F., Evolution of rigid zones in the flow of Herschel-Bulkley fluid.

ID 136. Ben Rahmoune M., Hafaifa A., Guemana M., Identification of vibration in gas turbine using nonlinear autoregressive with exogenous input NARX neural network.

ID 145. Barakat S., Hdjerssi S., M’hamdi B., Photovoltaic cell electrical characteristics modeling.

ID 148. Rekkal k., Bassou A., OptimizingTCM encoder over AWGN channel

ID 16. Bekraoui A., Hadjadj A., Oulhadj M., Harrouz A., Thermal flow sensor used for thermal flow meter.

ID 18. Haddouche R., Allad M., Charif M., Mathematical model of single screw extruder.

ID 28. Toumi T., Othmane A., Meftouhi A., Benabdelkader A., New interpretation of sag / swell compensation using an unified power quality conditioner.

ID 31. Nemmich M.A., Debbat F., Bees algorithm and its variants for complex optimisation problems.

ID 35. Ayadi F., Lahiani M., Derbel N., Kanoun O., Model fitting of li Ion battery based on genetic algorithms.

ID 36. Chaiba S.A., Ayad A., Ziani D., Dahmane N., Ghlam K., Javier G.M., Yann Le Bihan, Identification of eddy current probe parameters using a genetic algorithm.

ID 37. Kired M.R., Houa A.E., Hachi B.E., Static modeling of multiple cracks in finite plates containing voids and inclusions using XFEM coupled with multiple Level-Set.

ID 38. Fathallah M., Abdelhedi F., Djemel M., Derbel N., A synchronizing second order sliding mode control applied to decentralized disturbed multi-agent robotic systems.

ID 43. Dif N., Bounekhla M., Boudissa E., Determination of the single cage model parameters of induction machine using a basic firefly algorithm and theirs variants.

ID 46. Mouilid W., Bensaid S., Louzani Y., Boudref M.A, Cheriet A., Iron losses separation in steel material using a modified bertotti method: Combined to an analytic computation of eddy current losses.

ID 62. Ayad A.N. E. Islam, Ayad A., Krika W., Dahman N., Simulation of non-ferrous particles with eddy current separator.

ID 71. Lakhdari Y., Azzouzi M., Bessissa L., Garmat A., Modeling and fault detection by the neuro-fuzzy technique: Application to wind turbine system.

ID 78. Acimi M., Rahli M., Benasla L., Study of the collapse voltage in the west Algerian network with wind farm.

ID 80. Djidel B., Mokrani L., Machmoum M., Modified vector control strategy of the DFIG In case of voltage dips (sags): Application to a wind energy conversion system (WECS).

ID 84. Zeggai A., Benhamida F., Dahmane M.A., Ziane I., Power flow and voltage profile analysis with different scenarios of real industrial HV customer.

ID 85. Dahmane M.A., Benhamida F., Ziane I., Zeggai A., Load flow analysis and optimal reconfiguration in radial distribution system using ETAP.

ID 87. Boukirat S., Salhi S., Houassine H., Synthesis of the LF model of the three phase transformer windings using artificial bee colony algorithm from frequency response data measurements.

ID 88. Bensaber A.A., Benghanem M., A simple and improved nonlinear wind turbine control under wind speed variation and voltage dips.

ID 90. Abdelghani Rouini, Djillali Mahi, An investigation on barrier effect on point-plane AC breakdown voltage.

ID 92. Bounadja E., Boudjema Z., Djahbar A., High order sliding mode control of a DFIG-wind turbine based on AC-AC direct converter.

ID 130. Hafsi Z., Mansour O., Kadoun A., Correlation between the interaction volume and EBIC current in a Schottky barrier on silicon.

III. Diagnosis and Fault Tolerant Control

ID 02. Aggoune L., Chetouani Y., Distillation process fault detection by CUSUM test.

ID 09. Moussaoui L., Aouaouda S., Bouhali O., Observer based residual generator for nonlinear uncertain systems.

ID 101. Ahmed Saadi H., Boukala M.C., Diagnosability analysis of labeled timed petri net using reduction rules.

ID 102. Ayad M., Rezki M., Saoudi K., Benziane M., Chikouche D., Wavelet packets transform as an efficient method of signal processing for fault diagnosis.

ID 104. Amoura N., Kebir H., Flaw detection using the deformations field and an optimization method based on the nelder-mead simplex algorithm.

ID 106. Khadar S., Kouzou A., Control by backstepping of asynchronous machines in the presence of faults of the whole inverter-machine.

ID 107. Rabah A., Kaddour A., Zergoug M., Derouiche Z., Rolling bearing fault diagnosis based on empirical mode decomposition minimum entropy deconvolution combined with coefficients correlation.

ID 114. Hadroug N., Hafaifa A., Kouzou A., Chaibet A., Diagnostic of gas turbine defects using hybrid approach based on neuro-fuzzy system for the elaboration of there monitoring strategy.

ID 115. Djaidir B., Hafaifa A., Kouzou A., Nail B., Neural network monitoring and faults diagnosis system applied to the vibrations detection in gas turbine: Solar TITAN 130.

ID 118. Henini N., Tlemcani A., Chiba Y., Shading faults detection and classification in PV system by electric analysis.

ID 12. Azzi R., Farid A., Influence of the fatigue crack in the modal characteristics of the blades rotor.

ID 135. Guemana M., Hafaifa A., Benani A., Diagnostic of gas flow meter type sonic nozzle sensor using numerical calibration tests.

ID 138. Saadat B., Hafaifa A., Kouzou A., Fuzzy system for the prognosis of gas turbine failures: Vibration predictions.

ID 140. Ben Rahmoune M., Hafaifa A., Guemana M., Bekkadour F., Using artificial intelligence technique based on neural network in gas turbine monitoring.

ID 141. Allili B., Hafaifa A., Guemana M., Fuzzy decision making for gas turbine monitoring based on fault prediction.

ID 143. Achbi M.S, Kechida S., Fault tolerant control of reverse osmosis desalination plant with the application of SCADA system.

ID 63. Zemirline A., Ouali M., Mahieddine A., Abdellah E.H.A., Numerical comparison of a piezoelectric bimorph plate with four forms of electrodes.

ID 70. Sabri N., Tlemçani A., Chouder A., Internal faults detection of solar battery using anomaly detection algorithm.

ID 77. Achbi M.S., Kechida S., Diagnosis of hybrid dynamic systems through ANFIS and timed automata.

ID 89. Boukhmikhem O., Atroussi O., Houassine H., Parameters optimization of high frequency transformer winding model for failure diagnostic.

ID 98. Boudjellal M., Illoul R., State estimation and fault reconstruction for a nonlinear CSTR : A comparative study.

IV. Reliability Engineering and Failures analysis

ID 01. Bouraiou A., Hamouda M., Chaker A., Mostefaoui M., Neçaibia A., Lachtar S., Dabou R., Impact of the combination of the partial shading and EVA browning defects on PV module performance.

ID 08. Mazouz F., Belkacem S., Harbouche Y., Abdessemed R., Maintenance and security of the WECS: Case of blade conversion sub-system control.

ID 110. Motrani A., Rachid N., Methodology for implementing the industrial prognostic guided by data.

ID 120. Hamaidia M., Innal F., Failure sequences to solve dynamic fault trees.

ID 129. Bourareche M., Nait-Said R., Determining the necessary risk reduction using risk graph taking into account ALARP requirements.

ID 133. Djeddi C., Hafaifa A., Guemana M., Nail B., Reliability assessment of complex safety instrumented systems using stochastic Petri nets.

ID 14. Mellal M. Arezki, Edward J. Williams, Large scale reliability-redundancy allocation optimization problem using three soft computing methods.

ID 142. Djeddi A.Z., Hafaifa A. Abudura S., An exponential probability distribution used to model the reliability data of a gas turbine.

ID 144. Derradji R., Hamzi R., Towards an approach of process design risk-driven.

ID 149. Belhadef R., Hafaifa A., Guemana M., Modelling of reliability of the high-pressure pump using modified Weibull distribution

ID 30. Boulagouas W., Djebabra M., Proposal of a managerial approach for reliability continuous improvement.

ID 59. Demim F., Nemra A., Louadj K., Hamerlain M., Bazoula A., Implementation of an EKF-SLAM algorithm based on points and segment lines.

ID 60. Demim F., Nemra A., Louadj K., Hamerlain M., Bazoula A., SVSF-Based visual SLAM with efficient adaptive covariance intersection sharing for multiple UGVs.

ID 151. Bachene M., Tiberkak R., Rechak S., Vibrational behavior of cracked plates.